Top 10 Picks Best Mini Metal Milling Machine For 2022

Features :

• 💎【Product parameter】Motor Speed: 20,000rpm；Headstock speed: 2,000rpm；Support power: 12VDC/2A/24W
• 🚩【Machine main parts】such as the main shaft box, intermediate block, connecting block, tailstock, large slider, small slider, hand wheel, support and so on. Made of metal. The quality of the product is improved, more durable and more precise.
• 🔱【Recommendations】This tool is a milling cutter, milling machine, milling cutter and the side of the front blade, has certain risk, so be sure to use under the guidance of professional personage.
• 💙【Application】Youth Activity Center, School General Technical Room, Science and Technology Activity Room Equipment, Science and Technology Museum, Student Science Technology Creation, and can also be used at home.
• 🎁【Ideal gift】Can pass the boring time. Enjoy the fun of hands-on. It is an ideal gift for relatives, friends, craft lovers and metal carpentry lovers.

Features :

• Main parts: headstock, long/short machine bed, big/small slider, motor blade, connection block, gear etc. All of the parts are made of metal.
• Maximum motor power is 144W by using more powerful motor. Make sure that you pick up the right size.
• Motor case and headstock are jointed without any complex installation and assembly steps.
• With 0.02mm accuracy of scale lines, the hand wheel increases the precision of workpiece machining.
• Milling cutter with two cutting edges, is dangerous, so people should be guided by experts when using it.

Features :

• Sturdy & Durable Construction: The mini lathe is made of high-quality cast iron which stands up to tear and wear. It is equipped with a 650W motor that delivers a great deal of energy. If you are into making models, it would be your professional assistant who has precise metric graduations and metal gears and therefore is punctilious.
• Infinitely Variable Speeds: Revolving Speed Range: 50-2250±10%. The mini lathe machine comes with variable speeds that give you the convenience to achieve the best work. This lathe allows you to work on both forward or reverse of any possible speed. The feeding rate can be adjusted manually or automatically. And an emergency button is accessible just in case.
• Works With Precision: Spindle Bore: 0.8″/21 mm. The metal working lathe is pre-installed with a 3-jaw chuck, 3.9″/100 mm in diameter, which clamps raw materials tight, and a backsplash guard that ensures your safety during operation.
• Faster & More Effective: Swing Over Bed: 8.3″/210 mm; Swing Over Cross Slide: 13.8″/350 mm. The small metal lathe features a turret post for quick tool change and a cross slide for free blade moving, making internal cutting, face cutting and bevel cutting possible.
• Wide Application: The lathe produces precision work without taking up a lot of room in your shop or garage, making bushings, spindles, prototypes, models, and more.

Features :

• ♞【User Manual&GRBL Software】Our parcel include the CD,it include the installation instructions,user manual and GRBL software
• ♞【CNC 1310】 Working area:126mm*88mm*38mm / Machine Dimension: 281mm*281mm*287.5mm /Control Software: Grblcontrol / Lite.fire/Benbox. / Power Supply: DC24V adapter (input: 110VAC-240VAC) / Spindle Motor: 775 spindle motor (12-36V), 24V 8000r/min / Spindle Chuck: ER11 / Stepper Motor: 2-Phase 4-Wire Stepper Motors (1.3A 0.25N.m)
• ♞【Wide Application】Suitable for carve/engrave plastic, wood, acrylic, pvc, pcb,bamboo,MDF and silimar materials engraving/cutting,as well as copper, aluminum, and other kinds of soft metal materials.
• ♞【Supported System】Windows XP / Win 7 / Win 8 / Win 10.
• ♞【Professional Team】Please let us know if you need any help about the machine.AND please let us know if you fail to install the CH340 driver on Windows 10.

Features :

• Sturdy & Durable Construction: The mini lathe is made of high-quality cast iron which stands up to tear and wear. It is equipped with a 1100W motor that delivers a great deal of energy. If you are into making models, it would be your professional assistant who has precise metric graduations and metal gears and therefore is punctilious.
• Infinitely Variable Speeds: Revolving Speed Range: 50-2250±10%. The mini lathe machine comes with variable speeds that give you the convenience to achieve the best work. This lathe allows you to work on both forward or reverse of any possible speed. The feeding rate can be adjusted manually or automatically. And an emergency button is accessible just in case.
• Works With Precision: Spindle Bore: 1.5″/38 mm. The metal working lathe is pre-installed with a 3-jaw chuck, 4.9″/125 mm in diameter, that can clamp raw materials tight, and a backsplash guard that ensures your safety during operation.
• Faster & More Effective: Swing Over Bed: 8.7″/220 mm; Swing Over Cross Slide: 15.7″/400 mm. The small metal lathe features a turret post for quick tool change and a cross slide for free blade moving, making internal cutting, face cutting and bevel cutting possible.
• Wide Application: The lathe produces precision work without taking up a lot of room in your shop or garage, making bushings, spindles, prototypes, models and more.

Features :

• Now here is a Mini Milling Machine that has more features than some Mill/Drills and is affordable for everyone. This little brute will handle any kind
• No belt changes necessary! The variable speed control and gear drive saves you time and hassle—Truly a remarkable machine
• Features: • Dovetail column • Safety shut off switch • Adjustable depth stop • Fine feed head control • Geared drive • Clear guard on spindle • Rubber

Features :

•  It is driven by 12V safe direct current transformer. It is helpful for improving manual ability and independent thinking, thus effectively improving intelligence of children. So as to be a good didactical tool for children. It is also an ideal tool for DIY hobbyist and modelmaker to make various craft. 
• This is a Micro desktop lathe which can used for turning, drilling, boring, threading and other processing Made of advanced aluminum alloy, durable and non-deformable for usage. Note: When processing harder materials, the feed rate should be smaller, and the operation of aluminum and copper materials should be slow. Patience is required.which is slower than processing wood.
• Processing Materials: Wood, Plastic, Aluminum, Copper and other Soft Metal,CAN’T Processing Alloy,Brass Rod.Note: The harder the material, the smaller the depth of cut.we offer several shims for you to adjust the height of the turning tool.
• Note: The machine defaults to use high speed motor. If you need a low speed motor, please contact us.This machine is a micro lathe and cannot achieve high precision. Please check the size of the accessories.Three-jaw chuck clamping diameter: 13mm claw, 45mm reverse claw. If you have requirements for high precision, please consider purchasing carefully.
• Note: Please check the product description carefully, if you have more questions or don’t sure about your needs, please contact with our service staff. Please do not return at will after ordering. please contact us before. thanks for your help!We have been committed to providing customers with more and well products and services.

Features :

• 【Technic Parameters】Working Area: 126mm×88mm×38mm. Frame Size: 281mm×281mm×287.5mm. Control Software: Grblcontrol / Lite.fire. Power Supply: 5A, 24V(110V-240V). Spindle Motor: 775 spindle motor (12-36V), 24V 8000r/min. Spindle Chuck: ER11. Stepper Motor: 2-Phase 4-Wire stepper motor(1.3A 0.25N.m).
• 【Simple Assembly/Use】This mini cnc router machine kit is mainly designed for DIY carving enthusiasts/beginners, easily assembled and opertated, coming with a paper manual and USB flash drive/CD which contains all the files. Please let us know if you need any help.
• 【Applicable Engraving Material/Shape】CNC 1310 nachine can engrave plastic, wood, acrylic, pvc, pcb and silimar materials , as well as copper, aluminum, and other kinds of soft metal materials. It’s able to applicable for carving standard shape materials. Cylinder, curved surface and material of non-standard shape cannot be carved.
• 【GRBL Control Board/Software】This machine can be controlled by Grblcontrol/Candle software after connecting the control board to a coumpter via USB port. The control board has more fuctions such as support spindle PWM speed, limit switch, tool setting. Regarding the meaning of the control board ports, there are related descriptions on the back of the product.
• 【CNC Offline Controller】This machine can be controlled simply by the offline controller without connecting it to a computer. Support SD card and TF card at the same time, standard capacity 1G. After inserting the file into the SD card,the engraving file can be directly identified.

Features :

• Sturdy Aluminium Construction: The mini metal lathe bed is made of high grade iron. Equipped with nylon gears, this lathe machine is wear-resistant, sturdy, more accurate rotation and professional. Mini metal lathe power of motor: 550W. The full-length splash guard provides max. protection.
• Infinitely Variable Speeds: Spindle speed from 0-2250 RPM. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. The hardness and accuracy of the v-slide ways are obtained by raw material, heat hardening and grinding. Emergency stop button included.
• Accurate 3-Jaw Chuck: Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Back splash guard included. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.0004″ / 0.01 mm.
• Professional Compound Rest: The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting and bevel cutting by changing the tool post angle and adjusting the compound rest. Professional cross slide is designed with abrasive resistance, moving blades freely with feed rod.
• Wide Application: Driven by DC motor, this mini metal lathe cut off tool can be used in areas such as mini precision parts processing, sample processing and modeling works.