Top 10 Best Clarion 5 Channel Amplifiers Reviews In 2022

Features :

• 800 Watts of Maximum Music Power
• 95 Watts × 4 Channels + 320 Watts x 1 Continues @ 2-Ohms
• 55 Watts × 4 Channels + 200 Watts x 1 Continues @ 4-Ohms
• 180 Watts × 2 Channels Continues @ 4-Ohms Bridged + 200 Watts x 1 Continues @ 4-Ohms
• Selectable Bass Boost Control Nickel Plated RCA Connectors

Features :

• Country Of Origin : China
• Package Weight : 1.157 Kg
• Package Quantity : 1
• Front/Rear/Subwoofer Lever Control
• 6/4/2 Channel RCA Inputs
• 6-Channel / 5 Volt RCA Outputs (Front/Rear/Subwoofer)
• Front/Rear/Subwoofer Lever Control – Subwoofer Equalizer and Boost Level Controls
• High-Pass Crossover Frequency Multiplier
• Remote Subwoofer Level Control (Included) -Gold Plated Terminals

Features :

• 800 Watts of Maximum Music Power
• 95 Watts × 4 Channels + 320 Watts x 1 Continues @ 2-Ohms
• 55 Watts × 4 Channels + 200 Watts x 1 Continues @ 4-Ohms
• 180 Watts × 2 Channels Continues @ 4-Ohms Bridged + 200 Watts x 1 Continues @ 4-Ohms
• Selectable Bass Boost Control Nickel Plated RCA Connectors

Features :

• Power – 300 watts max x 4 @2-Ohms plus 5th channel 600 watts max x 1 @2-Ohms, 150 watts max x 4 @4-Ohms plus 5th channel 300 watts max x 1 @-4-Ohms, 600 watts max x 2 bridged @4 Ohms
• Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
• Full Range – With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
• Mosfet Power Supply – A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
• Low & High Level Inputs – A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
• Variable Bass Boost – With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)
• Bridgeable – Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels
• Specs – Dimensions – Depth 19.7” x Width 10” x Height 2.4”, Weight – 14 lbs.

Features :

• HUGE POWER IN A SMALL PACKAGE – 2,000 Watts gives you all the power you need tucked away and out of sight, keeping your vehicle looking clean and neat.
• WIDE RANGE OF APPLICATIONS – Ranging from 1-8 ohms, this amplifier will allow you to use a variety of speakers for your specific application. Never again will you need to worry about having the right amp for the job.
• BASS KNOB INCLUDED – The Candy X5B amplifier comes with a remote bass knob included. Always have control over the bass levels depending on what genre music you’re listening to.
• COMPACT MINI DESIGN – When we say compact we mean it. This powerhouse is only 11′” x 5″ x 2″. With those dimensions, you can put this just about anywhere!
• NEVER STOP INNOVATING ATTITUDE – DS18 stands out from other brands with our progressive designs and unwavering commitment to delivering the most technologically up-to-date products on the market.

Features :

• Ultra Compact MOSFET 5-Channel Class D Car Amplifier
• RMS Power @ 2 Ohm: 85 Watts x 4 + 450 Watts x 1 (14. 4v)
• Frequency Response: 10Hz – 20kHz for CH 1-4 & 10Hz – 500Hz for CH 5
• Crossover Control: HPF / Full-Range / LPF | Built In 4-Way Protection Circuitry
• Remote Bass Knob/Cable and Speaker Output Adapter Harness Included

Features :

• RMS Power @ 4 Ohms: 60 Watts x 4 + 200 Watts x 1
• RMS Power @ 2 Ohms: 90 Watt x 4 + 300 Watts x 1
• 4-Way Built-in Protection Circuitry: Thermal, Voltage, Speaker, DC
• LPF/HPF/Bass Boost Controls
• 4 Gauge Power and Ground Input Terminals

Features :

• Includes: Amplifier. Bass Remote. Birth sheet with tested power. Owner’s manual. Mounting Screws. Warranty.
• Rockville dB55 4000 Watt/2000 Watt RMS 5 Channel Amplifier. CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc). 2 Ohm: 120 Watts x 4 + 500 Watts x 1
• RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc). 2 Ohm 240 Watts x 4 + 1000 Watts x 1. 4 Ohm: 160 Watts x 4 + 600 Watts x 1. Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song. 2 Ohm 480 Watts x 4 + 2000 Watts x 1. 4 Ohm: 320 Watts x 4 + 1200 Watts x 1.
• High-Speed MOSFET Power Supply. Rugged switching MOSFETs for Class D in CH5. Under Voltage Protection at 10V. Over Voltage Protection at 16V. Optical Coupler Class “AB” +“D” Technology. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: (CH1-CH4)40Hz –4KHz /(CH5)50Hz –250Hz. High Pass Filter: 15Hz – 4KHz. Subsonic Filter: 15Hz – 55Hz.
• Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System. 8 Volt Preamp Circuitry. Status Mode LED Indicator. Minimum THD at Rated Power: 90dB. Frequency Response: 15-35KHz. Damping Factor: >100@ 100Hz. 40 Amp x3. Dimensions: (W x H x L) 9” x 2.4′ x 18.6″.

Features :

• Features: 5-channel car amplifier,

Features :

• CLASS D AMPLIFIER – Class D topology ensures high efficiency with big power and a small footprint. This mono amplifier was built for driving subwoofers and subwoofer systems, maintaining the highest sound quality sound for your car audio.
• BRIDGEABLE – Full range, five channel amplifier with flexible installation allows this amp to run in five channel or bridged mono mode, giving you the options you need to maximize the output of your car audio.
• BUILT FOR POWERFUL SOUND – Minimize heat generation with the PWM MOSFET power supply providing stability through the PC board. Old school Hifonics aluminum heat sink maintains superior heat dissipation to keep your car audio sounding smooth.
• CONTROL YOUR AUDIO – Control of amplifier output with onboard electronic crossover to tailor specific frequencies to speakers and subs. LED system protection allows you to monitor overload and speaker shortages with illuminated indicators.
• HIGH QUALITY CONNECTIONS – Secure molded connection terminal for all power, ground and speaker connections. Angled for ease of access while creating a clean wire management profile, to keep your vehicle looking clean while delivering optimal power.