10 Best Mill Lathe Drill Combo Recommended By An Expert

Features :

• Drawbar thread: 3-8-inch – 16
• Drilling capacity: steel – 7/8-inch
• 3/4-inch spindle bore
• 3-1/2-inch spindle travel
• 14 Spindle speeds at 117, 150, 220, 276, 290, 345, 360, 440, 450, 575, 640, 836, 1000, 1300 RPM

Features :

• [Precise positioning] HSS A type center drill is very useful in drilling accurate center holes, 60-degree chamfer can complete the dot hole at one time.
• [Good Chip Removal] Spiral groove helps clear chips and debris away from the bit, conducive to high-speed operation, accelerated chip removal, high temperature resistance and no sticking to the knife.
• [High Quality] Using high-speed steel material full grinding process, with high hardness and high wear resistance, can process high-hardness materials.
• [Sharp Edge] The Titanium drill bit is very wear-resistant, high processing efficiency and long service life
• [Widely Applicable] work with lathe machines and most electronic drills to drill holes in Steel, Iron, aluminum alloy, Carbon Steel, Brass and other tough material ranging.

Features :

• The UNIMAT MetalLine excels in model making, technical education, as well as in industrial use with features like Enhanced stability and precision of the entire system, Lowest tolerances due to precisely fitting bearing seats, True-running accuracy through dust protected industrial ball bearings, and Metal zero-adjustable hand wheels (0.05mm scale)
• The UNIMAT MetalLine allows for the building of the following machine variations: Lathe, Vertical Mill, Horizontal Mill, Center Drill Machine, and Handheld Drill / Sander.
• Contents Machine bed 271 mm + 140 mm, 12 V motor, 12 V safety adaptor, headstock, tailstock, 2x cross slides 90 mm, longitudinal slide 200 mm, metal intermediate pieces, metal-3 jaw chuck, 10 precision collets from 1 to 6 mm, stabilization plates, steel face plate, stabilizing angle, precision live center etc.
• Technical Data: Motor20.000 rpm, 12 VDC HeadstockM12x1, 8 mm hole through spindle Reduction 6:1 or 2,3:1 (3.333 or 8.696 rpm)
• Slides2 cross slides (30 mm), 1 longitudinal slide (145 mm travel), screw pitch 1 mm Tailstock M12x1, 30 mm sleeve travel Adaptor110-240V/50-60Hz,12V DC, 2A

Features :

• Precision proxxon engineering for top quality machinery
• 110 – 120V, 60Hz, 140W (0.1877hp), speeds 280 – 550 – 870 – 1,200 – 1,500 and 2,200rpm
• The lathe functions as a compound table, with X-Y travel being longitudinal and cross-wise respectively
• Three collets of sizes 15/64″ – 5/16″ and 25/64″ (6, 8, 10mm) are included.

Features :

• The table is suitable for Mini Drill and drill bracket series. It can also apply to other suitable machine.
• It can also apply to other suitable machine. The work table is composed of several adjustable dovetail slot aluminum alloy composition, can guarantee the minimum space and ensure the accuracy.
• Table size: 365 × 200 mm. Weight: 6.8 kg
• X axis distance is 180 mm. Y axis distance is 50 mm. Hand Wheel Scale Per Ring is 3 mm.

Features :

• * Fine Quality M2 Grade HSS 5 Pcs Set of Countersinks Tool Bit.- Sizes 1, 2, 3, 4 and 5, 60° tip angles.
• * Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes.
• * Can be used to make conical holes for a lathe center in order to make a starting point for a standard twist drill.
• * Designed to prevent the twist drill from walking, as well as for producing center holds in components or work pieces with require machining between centers.
• * Suitable for all Kinds of Materials: Metal, Alloy, Copper, Iron, Wood, Aluminum, and so on.

Features :

• 【Packing Include】Center drill set includes sizes 1, 2, 3, 4, and 5. These are 60 degree center drills with a right hand cutting direction.
• 【High Quality Material】Each center drill countersink is made of ground HSS high speed steel for good wear resistance, low consumption and durable with a hardness rating of Rc 58 – 60.
• 【Precisely Processing】Center and spotting drills are used to make a conical hole for a lathe center in order to make a starting point for a standard twist drill, designed to prevent the twist drill from walking.
• 【Application】60° countersink angle fits all standard centers, Used for centering work ends, where the work piece is to be revolved on machine centers

Features :

• Product Name : End Mill;Material : HSS
• Color : Gray;Cutting Diameter : 1/8″ 3/16″ 1/4″ 5/16″ 3/8″ 1/2″ 5/32″ 1/16″
• Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications.
• End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc.
• The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency.

Features :

• This versatile buffing system is equally at home in a cabinet shop or on a knife maker-inch or gunsmith-inch bench and is available in either 3450 r
• Motor is heavy-duty tic 1 hip 110v
• Large 1-Inch diameter shafts extend 8-Inch on either side and have a 5/8-Inch threaded arbor on the ends

Features :

• Small and beautiful – the accurate mill for lab, optician, jewelry, electronic and model building projects
• Supplied with a stable base of cast iron, vertical column and compound table are of treated, high quality aluminum
• All axes are play-free and have adjustable slides, headstock, made of die-cast aluminum
• Balanced special motor and provides stability even at high operating speeds
• Scope of delivery: 1x PROXXON MICRO Mill MF 70 including MICROMOT steel collet set and stepped clamp blocks of steel. Part number: 37110