Top 10 Best Mill Lathe Combo Machine In 2022

Features :

• This versatile buffing system is equally at home in a cabinet shop or on a knife maker-inch or gunsmith-inch bench and is available in either 3450 r
• Motor is heavy-duty tic 1 hip 110v
• Large 1-Inch diameter shafts extend 8-Inch on either side and have a 5/8-Inch threaded arbor on the ends

Features :

• Drawbar thread: 3-8-inch – 16
• Drilling capacity: steel – 7/8-inch
• 3/4-inch spindle bore
• 3-1/2-inch spindle travel
• 14 Spindle speeds at 117, 150, 220, 276, 290, 345, 360, 440, 450, 575, 640, 836, 1000, 1300 RPM

Features :

• Main parts: headstock, long/short machine bed, big/small slider, motor blade, connection block, gear etc. All of the parts are made of metal.
• Maximum motor power is 144W by using more powerful motor. Make sure that you pick up the right size.
• Motor case and headstock are jointed without any complex installation and assembly steps.
• With 0.02mm accuracy of scale lines, the hand wheel increases the precision of workpiece machining.
• Milling cutter with two cutting edges, is dangerous, so people should be guided by experts when using it.

Features :

• Sturdy Aluminium Construction: The mini metal lathe bed is made of high grade iron. Equipped with nylon gears, this lathe machine is wear-resistant, sturdy, more accurate rotation and professional. Mini metal lathe power of motor: 550W. The full-length splash guard provides max. protection.
• Infinitely Variable Speeds: Spindle speed from 0-2250 RPM. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. The hardness and accuracy of the v-slide ways are obtained by raw material, heat hardening and grinding. Emergency stop button included.
• Accurate 3-Jaw Chuck: Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Back splash guard included. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.0004″ / 0.01 mm.
• Professional Compound Rest: The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting and bevel cutting by changing the tool post angle and adjusting the compound rest. Professional cross slide is designed with abrasive resistance, moving blades freely with feed rod.
• Wide Application: Driven by DC motor, this mini metal lathe cut off tool can be used in areas such as mini precision parts processing, sample processing and modeling works.

Features :

• The UNIMAT MetalLine excels in model making, technical education, as well as in industrial use with features like Enhanced stability and precision of the entire system, Lowest tolerances due to precisely fitting bearing seats, True-running accuracy through dust protected industrial ball bearings, and Metal zero-adjustable hand wheels (0.05mm scale)
• The UNIMAT MetalLine allows for the building of the following machine variations: Lathe, Vertical Mill, Horizontal Mill, Center Drill Machine, and Handheld Drill / Sander.
• Contents Machine bed 271 mm + 140 mm, 12 V motor, 12 V safety adaptor, headstock, tailstock, 2x cross slides 90 mm, longitudinal slide 200 mm, metal intermediate pieces, metal-3 jaw chuck, 10 precision collets from 1 to 6 mm, stabilization plates, steel face plate, stabilizing angle, precision live center etc.
• Technical Data: Motor20.000 rpm, 12 VDC HeadstockM12x1, 8 mm hole through spindle Reduction 6:1 or 2,3:1 (3.333 or 8.696 rpm)
• Slides2 cross slides (30 mm), 1 longitudinal slide (145 mm travel), screw pitch 1 mm Tailstock M12x1, 30 mm sleeve travel Adaptor110-240V/50-60Hz,12V DC, 2A

Features :

• Infinitely Variable Speed: The mini metal lathe with metal gears is driven by powerful motor. Variable Speed: 0-2250RPM. The LED screen shows you a clear and accurate speed for accurate working. Operate either manually or with the adjustable auto feed rate. Spindle Accuracy: 0.0004-0.0012″ (0.01-0.03 mm).
• 400mm Large Swing Range: The benchtop lathe is equipped with a 3-jaw chuck. Swing Over Bed: 8-1/4″ (210 mm) and Swing Over Cross Slide: 15-3/4″ (400mm) offers more possibilities for large size or/and heavy workpieces.
• Professional Compound Rest: The mini lathe machine quick change tool post can achieve positions of internal cutting, face cutting, and bevel cutting by changing the tool post angle and adjusting the compound rest, moving blades freely with feed rod. 4-Way turret tool post (3/8″ max tool size).
• Supportive & Protective: Soft start, change-over switch for clockwise or counter-clockwise spindle rotation. Equipped with all-metal gears. Steady rest works as end support ensuring chatter-free operation. Backsplash guard included.
• Adjustable Tailstock: Taper in Tailstock Spindle: MT2. Rotate the lever clockwise to lock the spindle and rotate clockwise to advance the handwheel. To off-set the tailstock for cutting tapers by adjusting the four set screws located on the tailstock base. Travel: compound rest 2-1/8″ (54mm), cross slide 3″ (76mm).

Features :

• The table is suitable for Mini Drill and drill bracket series. It can also apply to other suitable machine.
• It can also apply to other suitable machine. The work table is composed of several adjustable dovetail slot aluminum alloy composition, can guarantee the minimum space and ensure the accuracy.
• Table size: 365 × 200 mm. Weight: 6.8 kg
• X axis distance is 180 mm. Y axis distance is 50 mm. Hand Wheel Scale Per Ring is 3 mm.

Features :

• Infinitely Variable Speed: The mini metal lathe is driven by DC motor with Power: 750W. Variable Speed(Rpm): 50-2250±10%. Taper in Spindle Nose: MT5. LED screen shows you the clear and accurate speed for accurate working. Soft start, change-over switch for clockwise or counter-clockwise spindle rotation. Operate either manually or with the adjustable auto feed rate.
• 750 mm Large Swing Range: The bench top lathe brings a 3-jaw Chuck with Diameter: 4.9″/125 mm. Swing Over Bed: 8.7″/220 mm and Swing Over Cross Slide: 29.5″/750 mm offers more possibilities for large size or/and heavy workpieces. Taper in Spindle Nose: MT5. Range of Imperial Threads: 8-44 T.P.I.
• Professional Compound Rest: The mini lathe machine quick change tool post can achieve positions of internal cutting, face cutting and bevel cutting by changing the tool post angle and adjusting the compound rest, moving blades freely with feed rod. Heat hardening lead screw.
• Supportive & Protective: Steady rest works as an end support, ensuring chatter-free operation. Follow rest is used for turning operations on long, slender workpices. Backsplash guard included.
• Adjustable Tailstock: Taper in Tailstock Spindle: MT2. Rotate the lever clockwise to lock the spindle, and rotate clockwise to advance the handwheel. To off-set the tailstock for cutting tapers by adjusting the four set screws located on the tailstock base.

Features :

• USMC EGA EMBLEM LAPEL PIN . Heirloom quality pin to be cherished for generations and a great Marine gift. Oorah ! !
• SIZE 1″ wide x 1 1/8″ high CAST SOLID PEWTER PIN.
• PACKAGED IN GIFT BOX. Newly manufactured under license of the trademark holder. The United States Marines Corps
• 100% AMERICAN PROUDLY MADE IN USA by Indiana Metal Craft.
• ORDER TODAY. We love our customers. Our mission is to bring you the best products.