Top 10 Best012 Tacoma Brush Guard In 2022

Features :

• BRIGHTER BEYOND EXPECTATION: High-quality LED chips, super bright and powerful white light to let you see the forward dark road clearly
• EXCELLENT LIGHTING EFFECT: 72W-Combination of spot and flood beam, further irradiation distance and wide range of light for broad view area
• ADJUSTABLE MOUNTING BRACKET: The light bar can be adjusted to about 45 degrees, which makes changing direction of light beam easier
• TWO AVAILABLE LEADS: With 2 sets of light output connectors for dual lighting fixtures less than 180W, the connection is more stable
• PACKAGE INCLUDE: 1PC 72W Combo LED Light Bar, 2PCS 18W Flood LED Light Bars and 1PC Wiring Harness Kit

Features :

• 4 Hole sizes from 6.3Mm(1/4″), 8mm(5/16″ ), 9mm(23/64″ ), 10mm(25/64″ ).
• 6 different Push pin rivet for many brand vehicles.
• Great material – these bumper clips are made of high-quality Black nylon Material, anti-wear and anti-corrosion, would not break or crack easily during use.
• Widely application – these Push clips are widely used for trim panel clips, door trim clips, door Panel clips, bumper clips, fender clips, engine cover and splash shield retainers replacement. It always covers some applications include telecom equipment, motor vehicles, domestic appliances, furniture and electrical equipment.
• PACKAGE INCLUDED:120PCS 6.3mm 8mm 9mm 10mm Bumper Push Rivet Clips,1PC Fastener Remover

Features :

• Super bright and wide illumination range: Advanced LED chips give out bright and white ray for clear visibility. Special designed lamp cup leads to a wider illumination range, allowing you to see the left and right clearly.
• Better heat dissipation: Quick cooling aluminum alloy heat sinks and high-quality heat conduction silicone gel can effectively extend the lifespan of the light bar to over 30, 000 hours.
• High protective performance: IP67 Waterproof Rate, waterproof up to 1 meter of water for 30 minutes and effectively dustproof. The stainless mounting brackets are rustproof and anticorrosive.
• Many indoor and outdoor uses: Garden lighting, backyard lighting, back-up light, off road lighting, construction lighting and so on.
• Package includes: 2PCS 18W flood led pods

Features :

• Durable Material: Made of sturdy 304 stainless steel, protecting itself well from corrosion and rust in bad weather.
• Free Adjustability: You’re able to freely adjust 180°up and down and 60°left and right to make sure your light is at the exact lighting direction and at a perfect lighting angle.
• No Drilling &Anti-slip Design: No drilling is required, just clamp the kit and tighten up. The clamp kit comes with anti-slip teeth and rubber pad to make sure a firm installation and no scratches left on the surface of the hood.
• High Compatibility: Can used to mount different thickness of work lights, fog lights, driving lights etc. As only the max limit of the clamp board thickness on the vehicle is within 8mm.
• Package Include: 2 x 304 stainless steel brackets (Lamp is not included.), 2 x hex Allen wrench.

Features :

• SUPER BRIGHT LIGHT: High quality LED chips, powerful and bright light beam, let you see the forward dark road clearly
• PERFECT COMBO BEAM: Excellent visual effect, spot beam for long distance illumination, flood beam for broad view area
• STURDY BRACKET: Strong aluminum alloy, fix the light on tube firmly; pre-drilled hole, allows more lights to be added to vehicle without drilling
• RUBBER INSERTS: High-quality rubber inserts help dampen vibrations during off-roading and protect your bull bar from being scraped
• PACKAGE INCLUDE: 1PC 126W LED light bar, 2PCS LED light bar mounting bracket kits and 1PC wiring harness

Features :

• PERFECTLY DESIGN REPLACEMENT FOR 2016-2019 TACOMA TRD PRO: Seven Sparta Aftermarket Toyota Tacoma grille lights are designed and made exclusively replacement for Tacoma 2016, 2017, 2018,2019 TRD PRO grille.
• UPGRADE ABS PLASTIC SHELL WITH FUSE ADAPTER & HARNESS WIRE: This excellent ABS material can prevent scratch, water and corrosion and will not fade even exposed for a long time. Each set of LED lights for TRP PRO will come with fuse adopter & harness, which will help for easy installation.
• SAFETY DRIVING: With 4 PCS LED lights replacement for TRD PRO grille, your car can easily be seen on the rainy days or foggy days, and keep your safety when driving down the road. this grill lights is the best light you can have for snow trails or at night.
• PLUG & PLAY: No drilling required. The installation is super easy and it only takes 15 minutes to finish installation. Just insert the light into a mesh hole, which one you prefer, and then connect the wire with car. The installation manual and Video on YouTube will help you install it easily and quickly.

Features :

• Heavy-duty bracket: High-quality aluminum alloy material and Advanced production process, the mounting bracket is impact resistant and anti-corrosion
• Mounting position: 4 different locations/methods to install the off-road lights. On the bull bar, 2 Sets of mounting holes on top and 1 set in front. Note: There is a possibility that the bracket holder may block some vehicles’ parking sensor. In some cases, you may be able to drill additional holes on the bracket to securely mount the bracket
• Easy installation: No drill, no modification required, just like replace a license plate using its mount location, usually can be installed in 20 minutes
• Universal fitment: Fits for almost all car, Jeep, truck, Pickup, SUV, 4×4, etc. Work with most off road auxiliary lights, fog lights, driving lights, LED work Lamp and LED light bars
• Package include: 1Pc front license plate mounting bracket

Features :

• Super bright beam: High intensity 3W LED chips and clear PC lens, super bright white light dispels darkness, ensuring safety of your trip
• Combo beam, clear view: 126w-appropriate combination of spot beam and flood beam for wide spread and long distance illumination
• Adjustable mounting bracket: The light bar can be adjusted to about 45 degrees, which makes changing direction of light beam easier
• Superior quality wires: Good electrical conductivity, high temperature and melting resistant, outstanding bending performance
• Package include: 1Pc 126W combo LED light bar, 2Pcs 18W spot LED light bars, 1Pc wiring harness and mounting brackets

Features :

• Sturdy bracket: Strong aluminium alloy, fix the light on tube firmly, raise the light bar height to avoid scratches while driving
• Useful rubber: High quality rubber inserts dampen driving vibration and avoid scraping bull bar surface. Simplifies the installation of Nilight off road LED light bars onto the roof rack, roll cages bull bar or head rack of your ATV, UTV and trucks
• Wide application: Can be used on tubes of 1″, 1-1/2″, 1-3/4″ & 2″ In diameter and applied to LED light bar for almost all kinds of vehicle
• Easy installation: Pre-drilled hole, allows more lights to be added to vehicle without drilling, Allen hex key included for quick installation
• Package includes: 2Pcs LED light bar mounting bracket

Features :

• High brightness: Advanced LED chips and clear PC lens, powerful and bright light beam, let you see the forward dark road clearly
• Perfect Combo beam: 126W, excellent visual effect, spot beam for long distance illumination, flood beam for broad view area
• Adjustable mounting bracket: the light bar can be adjusted to about 45 degrees, which makes changing direction of light beam easier
• Superior quality wires: good electrical conductivity, high temperature and melting resistant, outstanding bending performance
• Package include: 1Pc 126W Combo LED light bar, 2Pcs 18W flood LED light bars, 1Pc wiring harness and mounting brackets