10 Best Inland 3d Printer Filament Recommended By An Expert

Features :

• PLA FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)
• PLA FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 215°C – 230°C (419°F – 446°F) Recommended Bed Temperature: 60°C -80°C (140°F – 176°F) Spool Diameter: 8.81 in. (223.77 mm) – Spool Width: 2.81 in. (71.37 mm) – Spool Hub Hole Diameter: 2.00 in. (50.80 mm)
• INLAND PLA FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
• EASY-TO-USE: The Inland PLA filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. The Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back.
• NEW CARDBOARD SPOOL: PLA filament is non-toxic and comes with a cardboard spool. PLA is the most cost-effective way to bring your creations to life. *Please Note* You may receive either the plastic spool or cardboard spool for a short duration.

Features :

• 1.75mm 2.85mm filament PLA PRO PLA+ spooless refill 3d printer 1kg 2.2lbs spool+P3:U6
• Outer diameter 200mm, bore diameter 52mm, hub diameter 92mm, width diameter 54mm
• Spool is made of ABS plastic
• Does not come with Filament. Works with Inland 1KG 1.75MM PLA/PLA PRO (PLA+) Filament

Features :

• ABS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Cardboard Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)
• ABS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 240°C – 260°C (464°F – 500°F) Recommended Bed Temperature: 80°C – 110°C (176°F – 230°F) Spool Diameter: 8.81 in. (223.77 mm) – Spool Width: 2.81 in. (71.37 mm) – Spool Hub Hole Diameter: 2.00 in. (50.80 mm)
• INLAND ABS FILAMENT: Designed with the highest quality and compatibility in mind, Inland ABS Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! ABS is made from durable thermoplastic and is utilized for prints that are frequently handled, dropped, or in may be stored in high temperatures such as phone cases, sport camera mounts, toys, tools, electrical enclosures etc.
• EASY-TO-USE: The Inland ABS filament melts evenly and feeds smoothly into your 3D Printer creating defined corners, creating a durable, strong print. Produce your best print with our no-clog, bubble-free filaments. The Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back.
• NEW CARDBOARD SPOOL: ABS filament is non-toxic and comes with a cardboard spool in a cardboard box. *Please Note* You may receive either the plastic spool or cardboard spool for a short duration. Your filament will arrive completely dried and vacuum sealed with desiccant to ensure a high-quality smooth print.

Features :

• 1 KG (approximately 2.2 lbs) Spool/ 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)
• Recommended Extrusion/Nozzle Temperature: 210°C – 230°C (410°F – 446°F)/ No heated bed needed/ Vacuumed sealed with desiccant
• TPU Filament Features: high flexibility/ high mechanical strength, excellent resistance performance on: anti-wear, anti-aging, chemical resistance, waterproof, anti-oil, solvent resistance, cold proof and anti ultraviolet (yellowing resistance, anti-sun exposure) performance
• Wide Applications: TPU is widely used in health care, education, toys, building, automobile, electronics, and anime field, such as shoe insoles, watch bands, phone cases, drone parts and more
• Premium Quality: Inland TPU 3D Printer Filament Undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time creating! 100% satisfaction guarantee provided

Features :

• PLA PLUS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)
• PLA PLUS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 205°C – 225°C (401°F – 437°F), Recommended Bed Temperature: 60°C -80°C (140°F – 176°F) Spool Diameter: 8.81 in. (223.77 mm) – Spool Width: 2.81 in. (71.37 mm) – Spool Hub Hole Diameter: 2.00 in. (50.80 mm)
• INLAND PLA PLUS FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print.
• EASY-TO-USE: Inland PLA+ filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle-free, do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back.
• HIGH-QUALITY PLA PLUS: PLA+ filament is non-toxic, environment-friendly, and comes with a recyclable spool. PLA+ is less brittle than standard PLA, improving your prints’ toughness and layer adherence.

Features :

• 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) / Vacuumed sealed with desiccant
• Wide range of extrusion/nozzle temperature and heat stability: 160°C – 260°C (320°F – 500°F); Perfect for multiple material including PLA, ABS, PETG etc
• Eco-friendly 3D Printer Material, odor less and zero hassle printing, no harm to health. High compatibility for most of FDM printer
• With a certain level of adhesive ability, adhesive accumulated residual filaments and take them out to clean the interior extruder
• When to use: before and after printing, change matrial with different melt point, colors and properties for better extruder protection and printing effect

Features :

• 1 KG (approximately 2.2 lbs) Spool/ 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)
• Recommended Extrusion/Nozzle Temperature: 230°C – 250°C (440°F – 480°F)/ No heated bed needed/ Vacuumed sealed with desiccant
• PETG Filament Features: Durable/ good adhesion/ high strength/ high temperature resistant/ low shrinkage/ smoother finish/ odorless, combines the advantages of both PLA and ABS
• PETG Filament Features: Durable/ good adhesion/ high strength/ high temperature resistant/ low shrinkage/ smoother finish/ odorless, combines the advantages of both PLA and ABS
• Premium Quality: Inland PETG 3D Printer Filament Undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time creating! 100% satisfaction guarantee provided

Features :

• GLITTER PLA FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)
• GLITTER FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 190°C – 220°C (374°F – 428°F) Recommended Bed Temperature: 60°C -80°C (140°F – 176°F) Spool Diameter: 8.81 in. (223.77 mm) – Spool Width: 2.81 in. (71.37 mm) – Spool Hub Hole Diameter: 2.00 in. (50.80 mm)
• INLAND GLITTER PLA FILAMENT: Designed with the highest quality and compatibility in mind, Inland Glittery PLA Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
• EASY-TO-USE: The Inland Twinkling PLA filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back.
• HIGH-QUALITY SPARKLY PLA: Inland Sparkle PLA filament is non-toxic, the material has good toughness and strength. This material has a low shrinkage rate, and a uniform diameter for clean, even prints. You can expect a semi-transparent, sparkly print with Glitter PLA.

Features :

• 1 KG (approximately 2.20 lbs) Spool / 1.75mm Filament Diameter about 350m / 3.00mmFilament Diameter about 115m (Dimensional Accuracy +/- 0.05mm) / A wide range of colors available.
• Recommended Extrusion/Nozzle Temp: 230°C – 250°C (401° F~ 437° F).
• PLA Filament Features: Minimal warping/ No heating bed required/ Little to no odor, a most commonly used thermoplastic material for 3D printing.
• Widely Application: Inland PLA Filament is compatible with the majority of 3D printers, perfect for prototypes, desk toys, low-stress applications and other consumer productsDimensions: 155 x 155 x 85mm Inner Diameter: 55mm.
• Premium Quality: Inland PLA 3D Printer Filament undergoes numerous testing procedures, 100% satisfaction guarantee provided.

Features :

• TOUGH PLA FILAMENT PRINT SETTINGS: 1 KG (approximately 2.20 lbs) Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm) Recommended Extrusion/Nozzle Temperature: 210 °C – 230 °C (410 °F – 446 °F) Recommended Bed Temperature: 60°C -80°C (140°F – 176°F) Spool Diameter: 8.81 in. (223.77 mm) – Spool Width: 2.81 in. (71.37 mm) – Spool Hub Hole Diameter: 2.00 in. (50.80 mm)
• INLAND TOUGH PLA FILAMENT: Designed with the highest quality and compatibility in mind, Inland Tough PLA Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
• EASY-TO-USE: Inland Tough PLA filament is as easy to use as regular PLA, but has higher impact resistance. Tough PLA is engineered for strength and durability and is often compared to ABS for its mechanical characteristics. Produce your best print with our no-clog, bubble-free durable Tough PLA. The Inland filament can be used with most FDM and FFF 3D Printers.
• HIGH-QUALITY TOUGH PLA: The Tough PLA is non-toxic and tightly wound on its cardboard spool. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back.
• TOUGH PLA FEATURES: Tough PLA Filament is as easy to print as regular PLA, but with higher impact resistance. Tough PLA is engineered for strength and durability while taking advantage of the reliability and ease-of-use that PLA is known for. Odorless tough PLA doesn’t give off a toxic smell during printing. It’s generally considered an odorless filament.