Top 10 Best Mini Mill Lathe Combo Picks For 2022

Features :

• This versatile buffing system is equally at home in a cabinet shop or on a knife maker-inch or gunsmith-inch bench and is available in either 3450 r
• Motor is heavy-duty tic 1 hip 110v
• Large 1-Inch diameter shafts extend 8-Inch on either side and have a 5/8-Inch threaded arbor on the ends

Features :

• Sturdy Aluminium Construction: The mini metal lathe bed is made of high grade iron. Equipped with nylon gears, this lathe machine is wear-resistant, sturdy, more accurate rotation and professional. Mini metal lathe power of motor: 550W. The full-length splash guard provides max. protection.
• Infinitely Variable Speeds: Spindle speed from 0-2250 RPM. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. The hardness and accuracy of the v-slide ways are obtained by raw material, heat hardening and grinding. Emergency stop button included.
• Accurate 3-Jaw Chuck: Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Back splash guard included. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.0004″ / 0.01 mm.
• Professional Compound Rest: The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting and bevel cutting by changing the tool post angle and adjusting the compound rest. Professional cross slide is designed with abrasive resistance, moving blades freely with feed rod.
• Wide Application: Driven by DC motor, this mini metal lathe cut off tool can be used in areas such as mini precision parts processing, sample processing and modeling works.

Features :

•  It is driven by 12V safe direct current transformer. It is helpful for improving manual ability and independent thinking, thus effectively improving intelligence of children. So as to be a good didactical tool for children. It is also an ideal tool for DIY hobbyist and modelmaker to make various craft. 
• This is a Micro desktop lathe which can used for turning, drilling, boring, threading and other processing Made of advanced aluminum alloy, durable and non-deformable for usage. Note: When processing harder materials, the feed rate should be smaller, and the operation of aluminum and copper materials should be slow. Patience is required.which is slower than processing wood.
• Processing Materials: Wood, Plastic, Aluminum, Copper and other Soft Metal,CAN’T Processing Alloy,Brass Rod.Note: The harder the material, the smaller the depth of cut.we offer several shims for you to adjust the height of the turning tool.
• Note: The machine defaults to use high speed motor. If you need a low speed motor, please contact us.This machine is a micro lathe and cannot achieve high precision. Please check the size of the accessories.Three-jaw chuck clamping diameter: 13mm claw, 45mm reverse claw. If you have requirements for high precision, please consider purchasing carefully.
• Note: Please check the product description carefully, if you have more questions or don’t sure about your needs, please contact with our service staff. Please do not return at will after ordering. please contact us before. thanks for your help!We have been committed to providing customers with more and well products and services.

Features :

• Infinitely Variable Speed: The mini metal lathe with metal gears is driven by powerful motor. Variable Speed: 0-2250RPM. The LED screen shows you a clear and accurate speed for accurate working. Operate either manually or with the adjustable auto feed rate. Spindle Accuracy: 0.0004-0.0012″ (0.01-0.03 mm).
• 400mm Large Swing Range: The benchtop lathe is equipped with a 3-jaw chuck. Swing Over Bed: 8-1/4″ (210 mm) and Swing Over Cross Slide: 15-3/4″ (400mm) offers more possibilities for large size or/and heavy workpieces.
• Professional Compound Rest: The mini lathe machine quick change tool post can achieve positions of internal cutting, face cutting, and bevel cutting by changing the tool post angle and adjusting the compound rest, moving blades freely with feed rod. 4-Way turret tool post (3/8″ max tool size).
• Supportive & Protective: Soft start, change-over switch for clockwise or counter-clockwise spindle rotation. Equipped with all-metal gears. Steady rest works as end support ensuring chatter-free operation. Backsplash guard included.
• Adjustable Tailstock: Taper in Tailstock Spindle: MT2. Rotate the lever clockwise to lock the spindle and rotate clockwise to advance the handwheel. To off-set the tailstock for cutting tapers by adjusting the four set screws located on the tailstock base. Travel: compound rest 2-1/8″ (54mm), cross slide 3″ (76mm).

Features :

• Main parts: headstock, long/short machine bed, big/small slider, motor blade, connection block, gear etc. All of the parts are made of metal.
• Maximum motor power is 144W by using more powerful motor. Make sure that you pick up the right size.
• Motor case and headstock are jointed without any complex installation and assembly steps.
• With 0.02mm accuracy of scale lines, the hand wheel increases the precision of workpiece machining.
• Milling cutter with two cutting edges, is dangerous, so people should be guided by experts when using it.

Features :

• Supplied with a Z type Angle Plate. Precision ground from all sides/ faces for perpendicularity/ squareness.
• Small Vertical Milling Slide for Bench Small Lathes Suitable for Bench Lathes upto 150 mm Swing
• Quality Mini Vertical Slide with 2″ /50 mm Mini Steel Vice-Precisely Ground A Perfect combo for Milling on your Bench Lathe Machine . Length x Width : 90 mm x 50 mm.
• Maximum Jaw Opening possible is 45 mm Horizontal and Vertical V Groove in the moving jaws for holding Round jobs in this vice.
• Please read the description care fully and inspect all my pictures to understand the product better.

Features :

• Infinitely Variable Speed: The mini metal lathe is driven by DC motor with Power: 750W. Variable Speed(Rpm): 50-2250±10%. Taper in Spindle Nose: MT5. LED screen shows you the clear and accurate speed for accurate working. Soft start, change-over switch for clockwise or counter-clockwise spindle rotation. Operate either manually or with the adjustable auto feed rate.
• 750 mm Large Swing Range: The bench top lathe brings a 3-jaw Chuck with Diameter: 4.9″/125 mm. Swing Over Bed: 8.7″/220 mm and Swing Over Cross Slide: 29.5″/750 mm offers more possibilities for large size or/and heavy workpieces. Taper in Spindle Nose: MT5. Range of Imperial Threads: 8-44 T.P.I.
• Professional Compound Rest: The mini lathe machine quick change tool post can achieve positions of internal cutting, face cutting and bevel cutting by changing the tool post angle and adjusting the compound rest, moving blades freely with feed rod. Heat hardening lead screw.
• Supportive & Protective: Steady rest works as an end support, ensuring chatter-free operation. Follow rest is used for turning operations on long, slender workpices. Backsplash guard included.
• Adjustable Tailstock: Taper in Tailstock Spindle: MT2. Rotate the lever clockwise to lock the spindle, and rotate clockwise to advance the handwheel. To off-set the tailstock for cutting tapers by adjusting the four set screws located on the tailstock base.

Features :

• Sturdy & Durable Construction: The mini lathe is made of high-quality cast iron which stands up to tear and wear. It is equipped with a 650W motor that delivers a great deal of energy. If you are into making models, it would be your professional assistant who has precise metric graduations and metal gears and therefore is punctilious.
• Infinitely Variable Speeds: Revolving Speed Range: 50-2250±10%. The mini lathe machine comes with variable speeds that give you the convenience to achieve the best work. This lathe allows you to work on both forward or reverse of any possible speed. The feeding rate can be adjusted manually or automatically. And an emergency button is accessible just in case.
• Works With Precision: Spindle Bore: 0.8″/21 mm. The metal working lathe is pre-installed with a 3-jaw chuck, 3.9″/100 mm in diameter, which clamps raw materials tight, and a backsplash guard that ensures your safety during operation.
• Faster & More Effective: Swing Over Bed: 8.3″/210 mm; Swing Over Cross Slide: 13.8″/350 mm. The small metal lathe features a turret post for quick tool change and a cross slide for free blade moving, making internal cutting, face cutting and bevel cutting possible.
• Wide Application: The lathe produces precision work without taking up a lot of room in your shop or garage, making bushings, spindles, prototypes, models, and more.

Features :

• No more broken drive gears
• Much quieter operation
• Spindle speed up to 4300 RPM
• Ideal for manual and CNC mini mills