10 Best Boss Amp 1500 Recommended By An Expert

Features :

• POWER: 1500 Watts Max x 1 @2-Ohms, 750 Watts Max x 1 @4-Ohms
• CLASS A/B TOPOLOGY: Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
• MOSFET POWER SUPPLY: A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss And eliminating all secondary feedback circuitry
• VARIABLE LOW-PASS CROSSOVER: Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
• SWITCHABLE BASS BOOST: Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
• VARIABLE GAIN CONTROL: The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
• DIMENSIONS: The BE1500. 1 is 10 inches in Depth, 7 inches in Width and 2. 3 inches in Height. It weighs 4. 5 lbs.
• : BOSS Audio Systems provides a Powerful 6 Year Platinum Online Dealer so long as the purchase is made through . We strongly encourage professional installation of this product to ensure proper and safe functionality

Features :

• POWER: Maximum Power Output of 1500 Watts at 2 Ohms into one channel. MAX Power Output of 750 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
• HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the AR1500M to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
• LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the AR1500M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
• LOW-PASS CROSSOVER: A low-pass filter is an electronic circuit that removes all the notes below the filter’s frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
• SWITCHABLE BASS BOOST: Switchable Bass Boost allows you to boost the low bass +18db.
• DIMENSIONS: The AR1500M is 10.3 inches in Depth, 6.5 inches in Width and 2.6 inches in Height. It can be installed in a variety of different places due to its’ slim and compact design
• WARRANTY: BOSS Audio Systems provides a Powerful 6 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon Dot Com

Features :

• POWER: 1600 Watts Max x 1 @2-Ohms, 800 Watts Max x 1 @4-Ohms
• CLASS A/B TOPOLOGY: Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
• MOSFET POWER SUPPLY: A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
• VARIABLE LOW-PASS CROSSOVER: Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
• VARIABLE BASS BOOST: Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
• VARIABLE GAIN CONTROL: The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
• DIMENSIONS: The R1600M is 12.3 inches in Depth, 10.4 inches in Width and 2.25 inches in Height. It weighs 6.4 lbs.
• WARRANTY: BOSS Audio Systems provides a Powerful 6 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.Com. We strongly encourage professional installation of this product to ensure proper and safe functionality

Features :

• AMPLIFIER: Max power: 750 watts x 1 channel @ 4 ohms; 1500 watts x 1 channel @ 2 ohms; RMS Power: 563 watts x 1 channel @ 4 ohms; 1125 watts x 1 channel @ 2 ohms; Monoblock, Class A/B circuitry, MOSFET power supply
• HI/LOW LEVEL INPUTS: High and Low Level Inputs; RC Inputs: 2 Channel
• BASS BOOST: Variable Low Pass Crossover, Switchable Bass Boost; Low Pass Filter: 50 Hz to 250 Hz; Bass Boost: Switchable 0 or 18 dB
• AMPLIFIER SPECIFICATIONS: Remote bass control included; 2 ohm stable; Frequency Response: 9 Hz to 50 kHz ±1 dB; THD: 0.01%; Signal to Noise ratio: >105dB; Dimensions: 11.34 x 6.5 x 2.625 inches; Weight: 5.68 pounds
• WIRING KIT: 20 foot 8 gauge red power cable; Competition high quality fuse holder; 0.25 inch gold plated ring terminal; 3 foot 8 gauge black ground cable; Number 10 gold plated ring terminal; 16 foot 18 gauge blue turn on wire; 20 foot high performance RCA interconnect; 3 rubber grommets; 30 foot speaker wire; 0.3125 inch gold plated ring terminal; 6 foot split loom tubing; 20, 4 inch wire ties

Features :

• Power – 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms
• Full Range – With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
• Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
• Mosfet Power Supply – A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
• Variable Gain Control – The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
• Variable Bass Boost – With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)
• Bridgeable – Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels
• Specs – Dimensions: 9. 5” x 10. 31” x 2. 25”, Weight: 6. 62 lbs.
• – BOSS Audio Systems provides a powerful 6 year Platinum Online Dealer so long as the purchase is made through . We strongly encourage professional installation of this product to ensure proper and safe functionality

Features :

• Power – 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms
• Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
• Mosfet Power Supply – A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
• Low & High Level Inputs – A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
• Variable Low-Pass Crossover – Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
• Switchable Bass Boost – Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
• Variable Input Gain Control – The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
• Specs – Dimensions: 9.13” x 10.44” x 2.25”, Weight: 4.43 lbs., Speaker Impedance: 2 to 8 Ohm, THD @ RMS Output: 0.01%, S/N Ratio: 102 dB, Frequency Response: 9 Hz to 50 kHz, Fuse Quantity: 1 30 Amp ATO Blade
• Warranty – BOSS Audio Systems provides a 6 Year Platinum Online Dealer Warranty for purchases through Amazon.Com. We strongly encourage professional installation of this product to ensure proper functionality

Features :

• POWER: 3000 Watts Max x 1 @1-Ohm, 1500 Watts Max x 1 @2-Ohms. DIMENSIONS: The OX3KD is 12.3 inches in Depth, 7 inches in Width and 2.3 inches in Height. It weighs 6.5 lbs.
• CLASS D: Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
• 1 OHM STABLE: Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
• STRAPPING CAPABLE: You are able to strap TWO OX3KD amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power
• WARRANTY: BOSS Audio Systems provides a powerful 6 year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.Com. We strongly encourage professional installation of this product to ensure proper and safe functionality

Features :

• 20 Foot / 8 Gauge Red Power Cable, High Quality Competition Fuse Holder
• 3 Foot – 8 Gauge Black Ground Cable
• 16 Foot / 18 Gauge Blue Turn-On Wire, 30 Foot / 16 Gauge Speaker Wire
• 20 Foot High Performance RCA Interconnect, 6 Foot Split Loom Tubing
• (20) 4″ Wire Ties, (3) Rubber Grommets
• 5/16″ Ring Terminals, 1/4″ Ring Terminals, (4) Speaker Terminals

Features :

• Power – 300 Max x 2 @ 2 Ohms, 150 Max x 2 @ 4 Ohms, 600 Max Bridged x 1 @ 4 Ohms
• Bridgeable – Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels
• Low & High Level Inputs – A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
• Variable Low-Pass Crossover – Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
• Fixed High-Pass Crossover – Speakers reproduce sound based on high, low or mid-range frequencies. The High-Pass Crossover gears specifically towards “highs” in all size speakers including mid ranges and tweeters
• Variable Bass Boost – With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)
• Variable Input Gain Control – The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
• Specs – Dimensions: 9.16” x 10.44” x 2.25”, Weight: 4.25 lbs., Speaker Impedance: 2 to 8 Ohm, THD @ RMS Output: 0.01%, S/N Ratio: 102 dB, Frequency Response: 9 Hz to 50 kHz, Fuse Quantity: 1 35 Amp ATO Blade
• Warranty – BOSS Audio Systems provides a 6 Year Platinum Online Dealer Warranty for purchases through Amazon.Com. We strongly encourage professional installation of this product to ensure proper functionality

Features :

• 550 W MAX Power @ 2 Ohm x 4 Channels
• 275 W MAX Power @ 4 Ohm x 4 Channels
• 1100 W MAX Bridged Power @ 4 Ohm x 2 Channels
• Full-Range, Class A / B Topology, MOSFET Power Supply
• Low and High Level Inputs, Variable Filter, Variable Bass Boost
• Remote Subwoofer Control, Red LED Backlit Illumination
• Dimensions: Depth 15.5” x Width 10.3” x Height 2.3”
• 6 Year Platinum Online Dealer Warranty