10 Best Ac Refrigerant With Uv Dye Recommended By An Expert

Features :

• Contains four one quarter ounce applications of universal air conditioning system UV leak detection dye
• Can be used in all R-134a R-12 and R-22 systems
• Compatible with all PAG ester and mineral based refrigerant oils
• Meets SAE J2297
• Helps locate leaks

Features :

• The EASIEST and FASTEST way to inject UV leak detection dye into your air conditioning and refrigeration systems. No more messy syringes, hoses, or cans! Proudly MADE IN THE USA. The UV Dye illuminates brightly at the leak site when using a UV flashlight. Also visible to the naked eye. For best results, use a UV Flashlight in a shaded areas.
• For systems up to 5 Tons. Single use. Can be used in multiples for larger systems. Great for automotive A/C systems, refrigerators, central air conditioners, mini-splits, walk in coolers, and commercial refrigeration systems. Also compatible with our Leak Shot Automotive and Leak Shot HVAC injection kits.
• Compatible with all refrigerants including R22, 410A, 134A, 404A, 507A, 600A. Fully compatible with mineral, PAG, and ester oils.
• NOTE: This is UV leak detection DYE ONLY. There is no leak sealant in this product. For leak sealants, see our other products (Leak Saver Direct Inject and Leak Saver Direct Inject UV Refrigerant Leak Sealers). For use in automotive air conditioners, you will also need a 134A quick connect adapter and a manifold gauge with 1/4″ hose connections.

Features :

• Complies with Section 612 of the EPA Clean Air Act
• Contains approximately 12 oz. of R-134a and approximately 0.3 oz. of a fluorescent ultraviolet dye
• For use in vehicles with R-134a compatible A/C systems

Features :

• ♥ LARGE CAPACITY — A/C Oil and dye injector refrigerant tools with snap quick coupler, 2 oz Push-in type with 1/4 oz/7.5ml—2oz/60ml. It does not depend on a working compressor to get the oil or fluorescent dye into the system, one shot may cure and save a sickened compressor caused by low oil.
• ♥ WIDE APPLICATION — AC Oil and dye injector with low side port coupler quick snap-On 13 mm female connector to R134a manifold to work on car AC systems alike. Compatible with fluorescent dyes for leak monitoring, all oil types(POE, or mineral oil) and all home office AC and car AC systems.
• ♥ EASY TO INSTALL — There are three parts, oil cylinder, check valve quick connector, manufactured for quick and easy installation. Firstly, check valve screwed onto cartridge and tightened. The inner and outer cylinders are tightened clockwise, and then a little 1/4 SAE threaded inner core is used to discharge a little air inside the blue tube. Connect the low-pressure port of the refrigeration system that needs to be refueled, and add the required amount of cooling oil to the inner and outer
• ♥ MULTIFUNCTIONAL A/C OIL&DYE INJECTOR — A/C hand turn filler injection tool with aluminum alloy body, and brass connector on a piece of high pressure hose 1/4″ female connector, make it compatible with most AC systems (if not, use CV23p for some 5/16″ R410a systems).
• ♥ 1 YEAR WARRANTY — Order a/c ac oil and dye injector from Aupoko, we can provide 12months free worry warranty, should be there any question, please feel free to contact us, our customer service will reply you within 24 hours.

Features :

• THE EASIEST INJECTION METHOD: No more fussing with messy syringes, hoses, or pressurized cans. The Leak Saver injects directly and easily into the system with a basic manifold gauge set or even easier with our Leak Shot Injection Kits. Note: for automotive systems, you will still need the standard 134A to 1/4” charging adapter. Mini-splits may require a 5/16” to 1/4” charging adapter.
• MORE THAN 3 MILLION UNITS SOLD SINCE 2015: The Leak Saver can permanently seal small refrigerant leaks where the complete refrigerant charge is not lost within 72 hours. It’s similar to how blood in your body reacts to a cut. When a leak occurs, the Leak Saver reacts with the air and moisture at the leak site to permanently seal the leak. When used for preventative maintenance, the active ingredient circulates safely in the system to seal future leaks.
• WITH ADDED UV DYE FOR FINDING LARGE LEAKS: Seal it or find it! If you have a leak that is simply too large for leak sealants to seal, the added UV Dye will light up brightly at the leak site when using a UV flashlight.
• COMPATIBLE WITH ALL SYSTEMS AND REFRIGERANTS: : The Leak Saver UV is compatible with all systems, refrigerants (except ammonia), and oils. It is great for central air conditioners, car and automotive air conditioners, refrigerators, ductless mini-splits, heat pumps, geothermal heat pumps, commercial refrigeration systems, micro channel coils and more. It also works with all refrigerants including R410A Freon, R22 and replacements, R134A, R1234yf, R404A, R290, R600a, and more.
• YOUR SATISFACTION IS OUR PRIORITY: We stand behind the effectiveness 100%. If for any reason you are not satisfied with your product, please contact us and we will make it right.

Features :

• THE EASIEST INJECTION METHOD: No more fussing with messy syringes, hoses, or pressurized cans. The Leak Saver injects directly and easily into the system with a basic manifold gauge set or even easier with our Leak Shot Injection Kits. Note: for automotive systems, you will still need the standard 134A to 1/4” charging adapter. Mini-splits may require a 5/16” to 1/4” charging adapter.
• 3 in 1 SEALANT + MOISTURE REMOVER + UV DYE : Our proven leak sealant now includes moisture remover and UV dye for the complete system treatment! Now, you can seal your leak, remove system moisture, or find large leaks with the UV Dye…all in one easy to install package!
• OVER THREE MILLION UNITS SOLD SINCE 2015: The Leak Saver can permanently seal small refrigerant leaks where the complete refrigerant charge is not lost within 72 hours. It works similarly to how blood in your body reacts to a cut. When a leak occurs, the Leak Saver reacts with the air and moisture at the leak site to permanently seal the leak. When used for preventative maintenance, the active ingredient circulates safely in the system to seal future leaks.
• WORKS WITH ALL SYSTEMS AND REFRIGERANTS: Compatible with all systems, refrigerants (except ammonia), and oils. Useit on the following systems: central AC, mini split AC, cassette AC, car, refrigerated truck, home refrigerator, commercial refrigerator, boat, rv, ice machine, refrigeration racks, chillers, refrigeration condenser, cold rooms, and more. It also works with all refrigerants including R410A Freon, R22 and replacements, R134A, R1234yf, R404A, R290, R600a, and more.
• YOUR SATISFACTION IS OUR PRIORITY: We stand behind the effectiveness 100%. If for any reason you are not satisfied with your product, please contact us and we will make it right.

Features :

• 1 oz. of leak detection dye
• Used to identify leaks in R-1234yf A/C systems
• UV dye glows when under ultra-violet light for easy to identify leaks (UV flashlight sold separately)
• Compatible with lubricants that are commonly used in cars with R-1234yf A/C systems
• Meets SAE requirements

Features :

• R134a_ TOP OFF KIT – Included are (2) 12.3oz cans of R134a_ Refrigerant_ and 1 R134a_ Can Tap with Gauge. This amount of refrigerant_ is sufficient to recharge most systems that are low. Empty or large systems may require additional refrigerant
• Contains approximately 12 oz. of R-134a and approximately 0.3 oz. of a fluorescent ultraviolet dye
• Complies with Section 612 of the EPA Clean Air Act
• SSV CANS – Our cans are equipped with the 50 State compliant self-sealing valve design.Now you can easily store partially used R134a_ cans!
• Returns: This item is considered a HazMat Material and as such is not returnable. It requires hazmat certification to ship. Amazon does not supply a Return label and the seller will not supply return labels for this type of products. Please contact seller for any help you might need in using the product.

Features :

• AUTOMOTIVE LEAK DETECTION SOLUTIONS – The LEAKFINDER brand from TRACER PRODUCTS offers the brightest, most cost-effective, and efficient solution for finding AC and fluid-based vehicle leaks.
• PRODUCT DETAILS – Kit includes: LF20CS AC dye syringe injector (re-usable), LF1001 1 oz (30 ml) bottle of universal AC dye, LF2001 1 oz (30 ml) bottle of oil-based dye, LF3001 1 oz (30 ml) bottle of coolant dye, LF500CS cordless, violet light LED leak detection flashlight, LF30CS R-134a hose/coupler with purge fitting
• LEAK DETECTION MADE SIMPLE – Let the UV fluorescent dye circulate throughout the vehicle system. The dye escapes with the host fluid and collects at all leak sites. Use a LEAKFINDER leak detection lamp to scan and see all leaks glow brightly.
• PINPOINT MICRO LEAKS WITH HIGH ACCURACY – LEAKFINDER UV leak detection dyes find the smallest and most problematic leaks that would otherwise be impossible to detect. Quickly pinpoint hard-to-find leaks – including intermittent and multiple leaks.
• MADE IN THE USA – Proudly manufactured in the U.S.A., Tracer Products has over 65 years of experience delivering award-winning professional service and the industry’s most powerful leak detection dyes, inspection lamps, and diagnostic tools.

Features :

• Complies with Section 612 of the EPA Clean Air Act
• Contains approximately 12 oz. of R-134a and approximately 0.3 oz. of a fluorescent ultraviolet dye in self sealing cans.
• For use in vehicles with R-134a compatible A/C systems